Accessories

clamping platesToronto Gear Works is a leading supplier of Precision Mechanical Component and Power Transmission accessories. Accessories such as Clamping Plates, Idler shafts, Idler Shoulder Studs, and a Sonic Tension Meter,

Idler Shafts:

  • With set collars
  • Hardened
  • Ground
  • Shouldered and threaded into units
  • With set screw

Aluminum Clamping plates available from stock for open-ended belts in the following pitches and sizes:

  • MXL pitch for standard belt widths of 0.25”, 0.375”, and 0.5”
  • XL pitch for standard belt widths of 0.25”, 0.375”, and 0.5”
  • L pitch for standard belt widths of 0.375”, 0.5”, 0.75”, and 1”
  • H pitch for standard belt widths of 0.5”, 0.75”, 1”, 1.5”, 2”, and 3”
  • T5 pitch for standard belt widths of 25 mm
  • T10 pitch for standard belt widths of 25 mm, 50 mm, 75 mm, and 100 mm
  • AT5 pitch for standard belt widths of 25 mm
  • AT10 pitch for standard belt widths of 25 mm, 50 mm, 75 mm, and 100 mm
  • 3 mm Powerhouse HTD pitch for standard belt widths of 6 mm, 9 mm, and 15 mm
  • 5 mm Powerhouse HTD pitch for standard belt widths of 9 mm, 15 mm, and 25 mm
  • 8 mm Powerhouse HTD pitch for standard belt widths of 20 mm, 30 mm, 50 mm, and 85 mm
  • 14 mm Powerhouse HTD pitch for standard belt widths of 25 mm, 40 mm, 55 mm, 85 mm, 100 mm, 115 mm, and 170 mm
  • 2 mm Powerhouse pitch for standard belt widths of 3 mm, 6 mm, and 9 mm
  • 3 mm Powerhouse pitch for standard belt widths of 6 mm, 9 mm, and 15 mm
  • 5 mm Powerhouse pitch for standard belt widths of 9 mm and 15 mm
  • 8 mm Powerhouse pitch for standard belt widths of 20 mm, 30 mm, 50 mm, and 85 mm
  • 5 mm Powerhouse MX pitch for standard belt widths of 6 mm, 9 mm, 15 mm, and 25 mm
  • 8 mm Powerhouse MX pitch for standard belt widths of 12 mm, 21 mm, and 36 mm
  • 14 mm Powerhouse MX pitch for standard belt widths of 20 mm, 37 mm, 68 mm, 90 mm, and 125 mm.

Contact One of Our Sales Representatives Today
or call us today at | 800.387.6591